Emergency Jumper Cable Clip Intelligent Clamp Booster Smart Battery Clips for Universal 12V Car Jump Starter

Emergency Jumper Cable Clip Intelligent Clamp Booster Smart Battery Clips for Universal 12V Car Jump Starter

Availability: In stock

Product type:

Vendor: dealwake

Regular price $23.99

Smart jump starter clip connector Emergency Jumper Cable Clamp Booster Battery Clips for Universal 12V Car Jump Starter Pls attention : it...

Subtotal: $23.99

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question

Tags:

Guaranteed safe checkout:

Smart jump starter clip connector Emergency Jumper Cable Clamp Booster Battery Clips for Universal 12V Car Jump Starter

Pls attention : it is only starter clip ,not including jump starter ,hope you know!

About clip beep:

Please note：
1. if your jump starter without enough power, after connect with our clip cable, it will warn with beeping
2. if your jump starter has power, but only 3 built-in batteries, our clip cable will warn with beeping too, please connect with jump starter that has 4 built-in batteries

if the starter battery cells are below 4 pieces , the clip also will beep, so befor buy , pls check if your starter batter cells is 4 pieces, the clip can not work with 3 piece batter cells starter.

Functions:

1.Anti Short connection protection:Connect the red clip with the black clip when the power is on,No damage,no sparkle

2.Anti Over-discharge protection:Low voltage start,LED will flash at the frequency of 1HZ if the voltage is below 10.5V

3.Anti-reverse charge protection:After the car is started,Anti-reverse charge current is less than 1A

4.Anti Reverse polarity protection:Reverse connection with the Negative and positive end of the clamp and battery terminal,No damage, no sparkle

5.Anti High Temperature Start:When the temperature of the jump starter is higher than 80 Centigrade,the smart cable will prevent the current flow,to protect the jump starter

Instruction:

1.Connect the red and black battery clips to the positive and negative of car battery.

2.Insert plug of battery clips into start outlet of start power.

3.Turn auto key to start shift to start auto.

4.If the auto can not be started, turn the key after several seconds until it is started successfully.

5.Afterwards, pull storage battery plug from start power supply and remove clip from auto battery.

LED Smart clip :